What situations are suitable for making non smashing bricks

Step 1: Understand the core - who can the non smashing brick technology solve the problem of "who"?

To make a judgment, we first need to understand that the anti smashing brick technology mainly targets the problem of the sandwich layer below the tiles and above the structural layer. It is like a "minimally invasive doctor" who performs "surgery" through the gaps between tiles, treating the "diseases" of the waterproof layer and mortar layer.

The core principle is to use high-pressure grouting or permeable waterproof materials to re form a dense waterproof membrane at the damaged mortar and waterproof layers under the tiles, blocking or guiding water to the floor drain.

Step 2: Match your position - These situations are the "main battlefield" that avoids smashing bricks

If your water leakage phenomenon meets the following description, congratulations, there is a high probability that you can avoid the trouble of smashing bricks:

✅  Scenario 1: Local aging or damage of waterproof layer

Typical symptoms:

-When taking a shower in the bathroom, water starts dripping downstairs, and it slowly dries up when not in use.

-The leakage points are usually concentrated around the floor drain in the shower area and around the root of the sewer pipe.

-The adjacent walls of my bathroom have become damp, peeling, and moldy.

Why is it suitable for:

This is precisely the 'classic case' that the non smashing brick technology is most adept at handling. Water leaks through damaged waterproof layers in point or line like patterns, and grouting materials can accurately fill these cracks and pores.

✅  Scenario 2: Severe failure of tile gaps

Typical symptoms:

-When using water, it is obvious that water is rapidly seeping through the gaps of the tiles.

-The tiles are hollow and water comes out from the gaps as soon as you step on them.

Why is it suitable for:

Penetrating nano waterproofing agents can perfectly solve this problem. It can penetrate downwards along the gaps, forming a hydrophobic layer in the mortar layer, preventing water from seeping down and only flowing obediently towards the floor drain.

✅  Scenario 3: There are slight shrinkage cracks in the concrete structure

Typical symptoms:

Minor, non structural cracks appear on the floor slab, leading to leakage.

Why is it suitable for:

The high-pressure grouting slurry (such as acrylic salt) has excellent permeability and expansion properties, and can be injected into these hair like cracks and blocked.

Step 3: Be vigilant - in these situations, even without smashing bricks, there is nothing we can do

If encountering the following situations, please do not forcefully use non smashing bricks, otherwise it will only delay the condition and cause greater losses: