Maintenance and upkeep of electric tools

Please keep this instruction in good condition.

1) Workplace

Please keep the work area clean and well lit. Chaotic and dimly lit work areas may cause accidents.

Please do not use electric tools in environments with explosive hazards, such as environments with flammable liquids, gases, or dust. Sparks generated by electric tools may ignite dust and gases.

Please keep children and others away when using electric tools. Distraction may cause you to lose control of the device.

2) Electric safety

The power socket must match the power plug of the electric tool. Under no circumstances should the power plug be modified. Do not use any sockets with public grounding. Unmodified plugs and suitable sockets can reduce the risk of electric shock.

Please avoid physical contact with grounded surfaces such as pipes, heaters, stoves, and refrigerators. If your body is grounded, it will increase the risk of electric shock.

Keep the device away from rainwater and humid environments. Water ingress into electric tools increases the risk of electric shock.

Please do not use the power cord for other purposes, such as lifting or hanging tools, or unplugging the plug from the socket. Keep the power cord away from heat sources, oil stains, sharp edges, or moving tool components. Damaged or tangled power cords can increase the risk of electric shock.

When using power tools outdoors, please use an extended power cord that is allowed for outdoor use. Using an extended power cord suitable for outdoor use can reduce the risk of electric shock.

3) Life safety

Please stay awake, focus on your work, and operate power tools rationally. Please do not use power tools when you are tired or under the influence of drugs, alcohol, or other substances. The momentary distraction when using electric tools can cause serious injuries.

Please wear personal protective equipment and always wear eye protection. Wear personal protective equipment according to the form and characteristics of electric tools, such as dust masks, anti slip safety shoes, safety helmets, or noise protection earmuffs, to reduce the risk of injury.

Please avoid accidentally opening the device. Before inserting the plug into the socket, please ensure that the switch is set to the "off" position. When moving or transporting power tools, placing fingers on the switch or plugging the power tool into the power source when the switch is in the open position may cause accidents.

Please remove and move the adjustment screwdriver or wrench before opening the power tool. Tools or wrenches that come into contact with rotating equipment components may cause personal injury.