house extension|commercial builder|property maintenance|electrical repair|commercial renovationoffice fit out|shop refurbishment
How to disassemble an old-fashioned double cylinder washing machine, cut off power and water supply
Before disassembling, the first thing to ensure is that the power supply of the washing machine has been cut off to prevent electric shock. At the same time, the water source should also be turned off to prevent water splashing out.
Disassemble the casing
Use a suitable tool, such as a screwdriver, to disassemble the washing machine casing. This generally involves disassembling the rear cover and side panels in order to access the internal structure.
Remove the control panel
The control panel is usually fixed on the front panel of the washing machine and needs to be disassembled with a screwdriver.
Disassemble the washing system
Disassembling the washing system includes disassembling the pulsator, loosening and removing the relevant screws and connectors.
Dismantling the drainage system
The dismantling of the drainage system includes the dismantling of water pumps, filters, and drainage valves.
Inspection after disassembly
After the disassembly is completed, all disassembled components should be inspected to ensure that there are no omissions or damages.
Analysis of disassembly details
Power outage, water outage, and disassembly of the casing
Cutting off power and water is a necessary step before dismantling, which can ensure safety and smooth dismantling work. The disassembly of the shell is to expose the internal structure for subsequent operations.
Dismantling the control panel and dismantling the washing system
The disassembly of the control panel requires careful handling of the connecting wires and screws to prevent damage. The dismantling of the washing system involves the removal of the pulsator, which may require certain force and methods.
Dismantling the drainage system
The disassembly of the drainage system requires special attention to the disassembly of the water pump and filter, which are always delicate and need to be handled with care.
Inspection after disassembly
After disassembly, all disassembled components should be inspected to ensure that there are no omissions or damages. If there is any damage or missing, it should be replaced or repaired on time.
Share this post: